Up
For sale is a Lathe Face Plate. Diameter is 15.5 inches, the thread appears to be 2.5" OD, 6 TPI. The face plate was dirty and was professionally sandblasted by our technician. It was not oiled after sandblasting, which means that it is ready to be primed and painted on the back side. If you decide not to paint it, I would recommend oiling it.
While it has a bit of pitting on its face, it is very thick and so you can easily restore it to complete smoothness by taking off 1mm or so from its face. It will also improve its accuracy as mounted on your lathe. It seems to be completely usable as is, however.
