HP 6260B
Up
Used 6260B DC Power Supply. Separate coarse and fine adjustment
controls. Built-in overvoltage protection, remote error sensing and
auto-series, auto-parallel, and auto-tracking operation. Regulation:
0.01%. Metered. Ratings: DC Output: 0 to 10 Volts; 0 to 100
Amp. Overvoltage Range: 2 to 12 V. Constant voltage/constant current
operation. Remote control programming: constant voltage and constant
current operation by using an external resistance or dc voltage. Remote
sensing. Auto-series, -parallel, and -tracking operation. Standard input
power: 230VAC 3500VA (does not require 3 phase power).
Unit has been tested and verified to be in working condition
THIS SERIES OF HIGH-PERFORMANCE CONSTANT VOLTAGE/CONSTANT CURRENT
SUPPLIES INCLUDES TWELVE MODELS WITH OUTPUT RATING FROM 10 TO
60
V.ALL MODELS EMPLOY A TRANISISTOR
SERIES-REGULATOR/TRIAC-PREREGULATOR
CIRCUIT TO ACHIEVE HIGH EFFICIENCY,
EXCELLENT REGULATION,LOW RIPPLE AND
NOISE,AND MODERATE PROGRAMMING
SPEEDS IN A COMPACT FULL-RACKWIDTH PACKAGE.
SEPARATE COARSE AND FINE VOLTAGE AND CURRENT CONTROLS ALLOW
THE
VOLTAGE AND CURRENT OUTPUTS TO BE VARIED FROM ZERO TO THE
MAXIMUM
RATED VALUE,CROSSOVER FROM CONSTANT VOLTAGE TO CONSTANT CURRENT
OPERATION
OCCURS AUTOMATICALLY WHEN THE LOAD CURRENT EXCEEDS THE
VALUE
ESTABLISHED BY THE CURRENT CONTROL SETTINGS.
ADDITIONAL FEATURES
INCLUDE BUILT-IN OVERVOLTAGE CROWBAR PROTECTION;
REMOTE ERROR
SENSING;AND AUTO-SERIES,AUTO-PARALLEL,AND AUTO-TRACKING OPERATION.
THE
CROWBAR TRIP POINT ADJUSTMENT AND ASSOCIATED OVERVOLTAGE
INDICATOR ARE
CONVENIENTLY LOCATED ON THE FRONT PANEL.
- VOLTS:0-10
- AMPERES:0-100
- VOLTS:208 +-10%
- VA MAX:3500
The unit is fully operational and was checked out running into an
alternator tester at high power.
Approximate shipping size (with box): Length 23", Width 23.0", Height
10.0", Weight: 110 lbs. Buyer pays actual UPS ground shipping,
local pickup is free.
(Click on the thumbnail images to enlarge)
